Appliance Repair HubFind · Fix · Decode

AEG washing machine

AEG E13 error code: water leak detected

Leak protection triggered.

DIY: moderateTypical repair: £60–£160 depending on the part.

Likely causes

  • Leaking hose, seal or pump

How to fix E13

  1. Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Turn off water and check for leaks.
  3. Run a short test cycle. If E13 returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need E13 fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other AEG washing machine error codes

AEG washing machine repair near you

AEG washing machine repair

Frequently asked questions

What does AEG error code E13 mean?

Leak protection triggered. On a AEG washing machine, E13 is shown as "water leak detected".

How do I clear the E13 error on a AEG washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If E13 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix AEG E13?

£60–£160 depending on the part. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does E13 mean the same on every AEG model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.