Repair hub

Washing machine repair

Washing machines do the hardest mechanical work in the home: a heavy drum spinning at up to 1,600 rpm, a pump, a heater and a door lock, all running through water and detergent. Most call-outs come down to a handful of parts — the pump, drum bearings, door lock, carbon brushes and the heating element.

Typical repair £70–£180Typical life 8–12 yearsNew from £350–£800

Get a repair quote

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Washing machine faults and fixes

Washing machine repair by brand

Repair or replace?

If the machine is under 8 years old and the fault is a pump, door lock, hose, heater or carbon brushes, repair is almost always worth it. Drum bearing or main board failures on budget machines over 8 years old are where replacement starts to make sense.

Know your rights. Under the Consumer Rights Act 2015, appliances must be of satisfactory quality and last a reasonable time. If a fault appears within 6 months of purchase the retailer must prove it wasn’t there at delivery, and you can usually claim for up to 6 years (5 years in Scotland) if a product fails far sooner than it should. Check this before paying for a repair on a young machine.

Washing machine repair in your area

Frequently asked questions

How much does washing machine repair cost in the UK?

Most washing machine repairs cost £70–£180 including parts and labour. A replacement typically costs £350–£800, so repair is usually worth it unless the machine is old and the fault is major.

How long should a washing machine last?

A typical washing machine lasts 8–12 years. Regular cleaning and descaling in hard-water areas helps it reach the top of that range.

Should I repair or replace my washing machine?

If the machine is under 8 years old and the fault is a pump, door lock, hose, heater or carbon brushes, repair is almost always worth it. Drum bearing or main board failures on budget machines over 8 years old are where replacement starts to make sense.