Appliance Repair HubFind · Fix · Decode

Zanussi washing machine

Zanussi E10 error code: water inlet fault

The machine is not filling.

DIY: easyTypical repair: £70–£140.

Likely causes

  • Tap off
  • Blocked inlet filter
  • Faulty inlet valve

How to fix E10

  1. Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Check the tap, hose and inlet filter.
  3. Run a short test cycle. If E10 returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need E10 fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other Zanussi washing machine error codes

Zanussi washing machine repair near you

Zanussi washing machine repair

Frequently asked questions

What does Zanussi error code E10 mean?

The machine is not filling. On a Zanussi washing machine, E10 is shown as "water inlet fault".

How do I clear the E10 error on a Zanussi washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If E10 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Zanussi E10?

£70–£140. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does E10 mean the same on every Zanussi model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.