Appliance Repair HubFind · Fix · Decode

Bosch dishwasher

Bosch E17 error code: water inlet fault

The dishwasher is not filling in the time allowed.

DIY: easyTypical repair: £70–£140.

Likely causes

  • Tap off
  • Blocked inlet filter
  • Faulty inlet valve

How to fix E17

  1. Unplug the dishwasher (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Check the tap and inlet hose filter.
  3. Run a short test cycle. If E17 returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need E17 fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other Bosch dishwasher error codes

Bosch dishwasher repair near you

Bosch dishwasher repair

Frequently asked questions

What does Bosch error code E17 mean?

The dishwasher is not filling in the time allowed. On a Bosch dishwasher, E17 is shown as "water inlet fault".

How do I clear the E17 error on a Bosch dishwasher?

Switch the appliance off at the wall for 5–10 minutes, then restart. If E17 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Bosch E17?

£70–£140. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does E17 mean the same on every Bosch model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.