Appliance Repair HubFind · Fix · Decode

Bosch dishwasher

Bosch E22 error code: filter blocked

The system detects a blockage in the circulation path.

DIY: easyTypical repair: £70–£160 if a part is needed.

Likely causes

  • Clogged filter
  • Debris in the pump housing

How to fix E22

  1. Unplug the dishwasher (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Clean the filter and check the sump.
  3. Run a short test cycle. If E22 returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need E22 fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other Bosch dishwasher error codes

Bosch dishwasher repair near you

Bosch dishwasher repair

Frequently asked questions

What does Bosch error code E22 mean?

The system detects a blockage in the circulation path. On a Bosch dishwasher, E22 is shown as "filter blocked".

How do I clear the E22 error on a Bosch dishwasher?

Switch the appliance off at the wall for 5–10 minutes, then restart. If E22 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Bosch E22?

£70–£160 if a part is needed. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does E22 mean the same on every Bosch model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.