Appliance Repair HubFind · Fix · Decode

Hotpoint washing machine

Hotpoint F01 error code: motor control fault

A fault with the motor drive circuit.

Engineer jobTypical repair: £70–£170; a motor or board repair costs more.

Likely causes

  • Worn carbon brushes
  • Motor fault
  • Control module fault

How to fix F01

  1. Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Reset power for 5 minutes.
  3. If it returns, book an engineer to test brushes and motor.
  4. Run a short test cycle. If F01 returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need F01 fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other Hotpoint washing machine error codes

Hotpoint washing machine repair near you

Hotpoint washing machine repair

Frequently asked questions

What does Hotpoint error code F01 mean?

A fault with the motor drive circuit. On a Hotpoint washing machine, F01 is shown as "motor control fault".

How do I clear the F01 error on a Hotpoint washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If F01 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Hotpoint F01?

£70–£170; a motor or board repair costs more. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does F01 mean the same on every Hotpoint model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.