Appliance Repair HubFind · Fix · Decode

Hotpoint washing machine

Hotpoint F06 error code: control panel fault

A fault with the control panel or buttons.

Engineer jobTypical repair: £60–£190.

Likely causes

  • Faulty keypad
  • Wiring fault

How to fix F06

  1. Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Reset power; engineer to check the panel.
  3. Run a short test cycle. If F06 returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need F06 fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other Hotpoint washing machine error codes

Hotpoint washing machine repair near you

Hotpoint washing machine repair

Frequently asked questions

What does Hotpoint error code F06 mean?

A fault with the control panel or buttons. On a Hotpoint washing machine, F06 is shown as "control panel fault".

How do I clear the F06 error on a Hotpoint washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If F06 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Hotpoint F06?

£60–£190. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does F06 mean the same on every Hotpoint model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.