Appliance Repair HubFind · Fix · Decode

Miele washing machine

Miele F10 error code: drain fault

Water is not draining within the time allowed.

DIY: easyTypical repair: £70–£150 for a pump replacement including parts; filter clearing is free.

Likely causes

  • Blocked filter or pump
  • Blocked hose

How to fix F10

  1. Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Clean the pump filter and hose.
  3. Run a short test cycle. If F10 returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need F10 fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other Miele washing machine error codes

Miele washing machine repair near you

Miele washing machine repair

Frequently asked questions

What does Miele error code F10 mean?

Water is not draining within the time allowed. On a Miele washing machine, F10 is shown as "drain fault".

How do I clear the F10 error on a Miele washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If F10 comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Miele F10?

£70–£150 for a pump replacement including parts; filter clearing is free. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does F10 mean the same on every Miele model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.