Appliance Repair HubFind · Fix · Decode

Samsung washing machine

Samsung LE error code: water leak

The leak sensor has detected water.

DIY: moderateTypical repair: £60–£160 depending on the part.

Likely causes

  • Leaking hose or seal
  • Overfilled detergent drawer

How to fix LE

  1. Unplug the washing machine (or switch off at the wall) for 5–10 minutes to clear any temporary fault, then restart it.
  2. Turn off water, unplug, find the leak.
  3. Run a short test cycle. If LE returns, the fault is still there and an engineer should look at it.
Always switch off and unplug the appliance before inspecting it. Never work on gas appliances or fixed electrical wiring yourself — call a Gas Safe registered engineer or a qualified electrician.

Need LE fixed?

Free, no obligation. Tell us what's wrong and we'll connect you with a local engineer.

By sending this you agree that we may pass your details to a local engineer so they can contact you about this repair. We never sell your data.

Full fault guide

Other Samsung washing machine error codes

Samsung washing machine repair near you

Samsung washing machine repair

Frequently asked questions

What does Samsung error code LE mean?

The leak sensor has detected water. On a Samsung washing machine, LE is shown as "water leak".

How do I clear the LE error on a Samsung washing machine?

Switch the appliance off at the wall for 5–10 minutes, then restart. If LE comes back, work through the checks on this page — the fault is real and needs fixing, not just resetting.

How much does it cost to fix Samsung LE?

£60–£160 depending on the part. is typical, depending on the part. Simple blockages cost nothing to clear yourself.

Does LE mean the same on every Samsung model?

Not always. Codes are broadly consistent within a brand, but model ranges differ. Check your manual if the symptoms below don’t match.